UNI-T Coating Thickness Gauge UT343D 0.1 Micron/0-1250um Automotive Paint Film Thickness Tester To Measure FE/NFE Paint Tools
UT343A is used to measure the thickness of the plated and coated sheet on ferrous/non-ferrous, it has the large range up to 1750um, which is widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in workshop and outdoor.
Specifications | Range |
Certificates | CE, UKCA |
Measuring range | 0~1750um |
Accuracy | ±(3%H+1)um |
Measurement method | Single/Continuous |
Measurement mode | Max/Min/Avg |
Metal type | Ferrous/non-ferrous |
Features | |
Display type | EBTN display |
LCD brightness control | √ |
Rotatable screen | √ |
Unit conversion | √ |
Audio alarm | √ |
LED alarm | √ |
Data storage | 199 groups |
Auto power off | √ |
Low battery indication | √ |
General Characteristics | |
Power | 1.5V battery (LR03) x 2 |
Product color | Red and grey |
Product net weight | About 111g |
Product size | 117mm x 53mm x 37mm |
UT343D coating thickness gauge can measure coating thickness on ferrous and non-ferrous materials. This device is designed with a unique quick test feature, which allows users to set thickness range and using a 3-color LED and audio alarm to quickly determine if coating being tested falls within the preset range, greatly increasing work efficiency.
Specifications | Range |
Measuring range | 0~1250um |
Accuracy | ±(3%H+1)um |
Resolution | 0.1um (0~99.9um); 1um (100~1250um) |
Measurement method | Single/Continuous |
Measurement mode | Max/Min/Avg |
Metal type | Ferrous/ non-ferrous |
Features | |
Display type | 2.0-inches TFT LCD (320 x 240 pixels) |
LCD brightness control | √ |
Auto rotatable screen | √ |
Unit conversion | √ |
Audio alarm | √ |
LED alarm | √ |
PC analysis software | √ |
USB communication | √ |
Quick test mode | √ |
Data storage | 500 groups |
Auto power off | √ |
Low battery indication | √ |
General Characterisitics | |
Power | 1.5V AA battery (LR6) x 2 |
Display | 48mm x 36mm |
Product color | Red and grey |
Product net weight | 175g |
Product size | 153.5mm x 64.5mm x 41mm |
UT343E coating thickness gauge can measure coating thickness on ferrous and non-ferrous materials. The measuring range is up to 2000µm, and the data can be analyzed through Bluetooth APP and PC software of mobile phones, which can be widely used in manufacturing, metal processing, chemical industry, commodity inspection and other detection areas.
Specification | Range | Thickness | Resolution | Accuracy |
Certificates | CE/UKCA | |||
Ferrous and non-ferrous substrates measurement (FE and NFE) | 0~2000μm | 0~99.9μm | 0.1μm | ±(2%H+2μm) |
100~2000μm | 1μm | |||
0~78.7mil | 0~4.99mil | 0.01mil | ±(2%H+0.08mil) | |
5.0~78.7mil | 0.1mil | |||
Bluetooth and App function | √ | |||
Probe measuring force | 0.3~1.5N | |||
Display | 2''color TFT screen | |||
Auto rotatable screen | √ | |||
Unit conversion | μm/mil | |||
LED /Audio alarm | √ | |||
Limit setting | 0~2000μm | |||
Measurement method | Single/continuous | |||
Statistical measurement | Max/Min/Avg | |||
Matrix identification modes | Auto/manual | |||
Voice broadcast | √ | |||
Flashlight | √ | |||
USB communication | Upper computer communication | |||
Data storage | 3300 data | |||
LCD brightness control | √ | |||
Auto power off | 5 minutes | |||
Low battery indication | √ | |||
Power supply | 3.7V 1300mAh Lithium battery | |||
General Characteristics | ||||
Power | 3.7V 1300mAh Lithium battery | |||
LCD Size | 2 inch | |||
Product color | Red and Gray | |||
Product net weight | 150g | |||
Product size | 152*65*35mm |
Unit conversion : μm/mil
Matrix identification modes : Auto/manual
مع إضاءة خلفية أو لا : YES
Measurement method : Single/continuous
شهادة : CE
Probe measuring force : 0.3~1.5N
Statistical measurement : Max/Min/Avg
رقم النموذج : UT343A / UT343D / UT343E
Origin : CN (المنشأ)
اسم العلامة التجارية : UNI-T