Brake Fluid Liquid Tester Pen With 5 LED Vehicle Diagnostic Tool For DOT3/DOT4

Note :There is no battery in the package !

Instructions:

Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.

1. How Dangerous of a bad quality Brake Fluid ?

1) The inferior brake fluid causes the brake failure easily,thereby lead to a accident

2) The Brake fluid is related to the life of Brade pads, if doesn't take it seriously, the life of brake pads is worried.

2. The testable brake fluid list

Good or Bad Distinguish accurately !

Our Brake Fluid tester designs 4 level digital led indicator that can provide the accurate water content for you.

LED Indicator Display:

1.Five LEDs indicating the water % in the brake fluid:

2.

The green LED lights

0% light indicates that the battery is OK, no replacement

3.

The yellow LED lights

1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.

2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use

3.

The red LED lights

3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid.

4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately.

>Red LED: change brake fluid<;

Functions:

1.check the car brake oil quality

2.5 LED lights display the percentage of moisture content in brake fluid,how the test results more accurate

3.Press the button for power on, green LED will light up.

4.Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.

5.Testing for DOT 3, DOT4, DOT5 brake fluid

6.Auto power off, Supports 1 LR03 AAA batteries (not included)

Accurate To 1% For TEST

The Metrics is accurate to 1%, it can help you to know the situation of Brake Fkuid more clearly .

How to use Brake fluid tester ?

Step 1 : Open car's front cover

Step 2 : Find the brake Oil tank mouth

Step 3 : Dip test probes and read the Led lights

Step 4 : Recover the car's front cover

Package List:

1 x a brake fluid tester

(Battery not included)

Type 3:Car Battery Tester BM310

Type 4:Car Battery Tester BM320

Type 7:Type 2+ Type3

Type 8:Type 2+ Type4

How to use BM310/BM320 Car Battery Tester ?

To BM310 :

Connect the test clips to battery positive and negative position, check the LED display to

know the car battery condition.

To BM320 :

Connect the Cigarette Lighter to battery positive and negative position, check the LED display to

know the car battery condition.

BM310

12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display

12V

led digital battery mate is a simple but efficacious battery testing tool which can determine the battery state, it's easy to use and be understood.

Main Functions:

1. Checking charge level

2. Functional test of dymano

3. Checking battery starting capability

4. Battery overload display

BM320

12V Digital Car Battery Tester Alternator Motorcycle Battery Tester with 6 LED Lights Display